What to do if your Wi-Fi drops out constantly

  • Run Windows Network Troubleshooter
  • Update your router firmware
  • Set your router to a specific channel
  • Reset DHCP server settings
  • Reset your router to factory defaults
  • Change your Power Management settings
  • Reset WLAN AutoConfig
  • Roll back your network driver

If your WiFi connection is dropping constantly without any particular reason, we’re going to show you a few workarounds in order to solve this connection problem. We hope that at least one of the following solutions will  be helpful.

  • Some Windows 10 users report that they are facing a frequent loss of Wi-Fi connection.

  • In most cases, the underlying issue is not major, and there’s no need to worry.

  • We comprised a guide on what to do about the most frequent culprits that lead to your Wi-Fi dropping.

  • Find below step-by-step instructions on how to update your router firmware, reset WLAN Autoconfig, set your router to a specific channel, and more.

  • Download DriverFix (verified download file).

  • Click Start Scan to find all problematic drivers.

  • Click Update Drivers to get new versions and avoid system malfunctionings.

  • DriverFix has been downloaded by 0 readers this month.

Wi-Fi keeps dropping out on Windows 10

1. Run Windows Network Troubleshooter

Before we try anything more drastic, we’re going to try a traditional, easy solution. We’re going to run a Windows Troubleshooter and hope that it will find the cause of WiFi connection problem, and provide us with the proper solution. To run Windows Network Troubleshooter, do the following:

  • Go to Search, type troubleshooting, and go to Troubleshooting
  • Under Troubleshoot computer problem click on Network and Internet
  • Click on Network Adapter to start the troubleshooter

You can also run the Network troubleshooter from the Settings page. Simply open Settings > go to Update & Security > Troubleshoot and run the troubleshooter.

The troubleshooter will scan your computer, and it will provide you with fixes, if it finds anything. On the other hand, if this traditional solution didn’t work for you, you might as well try some of the solutions listed below.

2. Update your router firmware

Updating your drivers is one of the most common solutions for almost any Windows-related problem, especially if you’re using Windows 10, because it’s still not compatible with a lot of drivers and other software. To update your router’s firmware check the model of your router, then go to manufacturer’s website and find the appropriate driver or software update.

You might also receive an update for your wireless drivers through Windows Update, because Microsoft is releasing new updates to its users every day, so just in case, check for Windows Updates once again.

We also recommend a third-party tool to automatically and safely download all the up-to-date drivers for your PC.

Not only will it save you a lot of time, but it will find the perfect driver version for you hardware. This eliminates the risk of permanent damage that can be caused by a faulty driver.

The tool we suggest you try is also able to fix any damaged or missing drivers on your device. You can set it up to run in the background and regularly update your drivers whenever necessary.

⇒ Get DriverFix

3. Set your router to a specific channel

First we need to figure out the right WiFi channel. To do so, your best bet would probably be one tiny, third-party software, Nirsoft’s WiFiInfoView, which doesn’t even require an installation, just unzip and run it. You’re going to use WiFiInfoView to see all of the networks using each channel.  Find which channel is used by the most networks, and switch to another, less-occupied, channel.

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.Click here to download and start repairing.

Expert tip:

SPONSORED

Now that we determined which channel we want to use, we have to move our connection to that channel. Go to your browser, enter the address of your router and login. If you don’t know the address of your router, go to Command Prompt, enter ipconfig command and look for Default Gateway.

After you logged in your router settings, go to Wireless>Basic Wireless Settings, specify a new channel, but use other channel than the default. If you’re using dual bound router, make this settings for both of your bands (2.4GHz and 5GHz).

4. Reset DHCP server settings

If your wireless connection connects, then disconnects, and connects again only for a few seconds, maybe your PC is trying to find an IP address and DHCP server is not cooperating properly. To fix this problem, do the following:

  • Go to Search, type cmd and open Command Prompt
  • Enter the following line and press Enter:
  • ipconfig.exe/release
  • After that, enter this command line and press Enter:
  • ipconfig.exe/renew

5. Reset your router to factory defaults

If none of the previous solutions worked for you, try to reset your router to factory defaults. You can reset your router by pressing miniature button on the back of the router. But since this button is placed in the little hole, you’ll have to use some kind of pin (like toothpick, or the end of a paper clip) to press the button.

  • ipconfig.exe/release

  • ipconfig.exe/renew

Hold it down for 10 seconds, and your router will reset. After you reset your router, you’ll have to re-configure its settings again, and set a new password.

6. Change your Power Management settings

If you allowed your computer to turn off your Wi-Fi device in order to save power, this may explain why you’re having intermittent Wi-Fi connection issues. Here’s how to fix this:

  • Fix: Wi-Fi keeps disconnecting on laptop

  • Fix: WiFi connection drops every few seconds on Windows 10/11

  • Navigate to the Network and Sharing Center > select Change adapter settings.

  • Right-click your WiFi adapter > go to Properties > select Configure.

  • Go to the Power Management tab > Uncheck the box ‘Allow the computer to turn off this device to save power’ > OK.

7. Reset WLAN AutoConfig

If nothing worked so far, then resetting the WLAN AutoConfig may be the answer to your problem:

  • Go to Start > type services.msc > hit Enter.
  • Locate the WLAN AutoConfig feature and double click on it (or right-click on it and go to Properties).
  • Go to Startup type > change it to Automatic > hit Apply.
  • Restart your computer and check if your WiFi connection is still dropping out.

8. Roll back your network driver

If this issue occurs immediately after you installed the latest Windows 10 updates, you may also want to try rolling back your network driver. To do this:

  • Open Device Manager > go to Network adapters > locate your network adapter name
  • Right-click on your adapter > go to Properties
  • Select the Driver tab > click on the option ‘Roll back driver’
  • Follow the on-screen instructions to complete the process.

There you go, we hope that at least one of these solutions solved your problem. Let us know if you’re still experiencing WiFi issues.

If the advices above haven’t solved your issue, your PC may experience deeper Windows problems. We recommend downloading this PC Repair tool (rated Great on TrustPilot.com) to easily address them. After installation, simply click the Start Scan button and then press on Repair All.

Still having issues? Fix them with this tool:

  • internetWi-Fi issueswindows 10 fix

Email *

Commenting as . Not you?

Comment